Can I use a 100W charger for my iPhone?: There will always be times when you’ll need to charge your phone but don’t have a charger with you. Apple doesn’t include a charging block in the box of the new iPhone 12. You do get a Lightning cord.
Can you simply plug in any charger to charge your phone now that most handsets are compatible with wireless charging and USB-C standards? The short answer to this question is yes. However, the longer answer requires a little more explanation.
You’ll often see the watt value on chargers. This is how much power the charger can deliver to your phone. Tablets and laptops have larger batteries, so chargers have a higher wattage.
The maximum wattage your phone is capable of taking, and the power coming from your charger will determine how quickly your phone can go from zero to one hundred.
You should be able to find this information by doing a quick internet search. The iPhone 12 can, for example, handle up to 20W.
If you purchase the Apple 20-W charger, your iPhone 12 will be charged four times faster with the Apple 5-W charger. Note that the 20W charger supports larger iPad tablets, whereas the 5W charger does not, as we have already explained.
How quickly your phone will go from zero up to 100 depends on the maximum wattage that your phone is capable of. This information can be found by searching the internet. For example, the iPhone 12 is capable of handling up to 20W.
The Apple 20W charger will charge your iPhone 12 four times faster than the Apple 5W charger. As we’ve already mentioned, the 20W charger is compatible with larger iPad tablets, while the Apple 5W charger doesn’t. [Can I use a 100W charger for my iPhone?]
7 Best 100w fast charger that you can use for your iPhone
- Anker PowerPort Atom PD 4
- UGREEN 100W USB C Charger
- RAVPower PD Pioneer 100W
- Satechi 100W USB-C PD Compact GaN Charger
- Aukey Omnia 100W PD Charger
- Zendure SuperPort 4
- Hyper Juice 100W GaN Charger
1. Anker Power Port Atom PD 4
A few weeks back, we did a hands-on test of the Anker PowerPort Atom PD4 charger. It has a maximum 100W PD charger and 2A2C ports.
No Charger LAB review would be complete without a teardown. Let’s have a closer look at this new desktop charger.
The output panel has a light grey matte finish. It features 2 USB C ports and 2 USB A ports. This is commonly known as a 2A2C configuration.
All of them are in the signature Anker color, with protocol letters on top. On the left side, there is a power indicator ring that emits a blue light once the power is on.
The PCBA can be seen clearly after removing the thermally conductive silicone strip and cleaning up the white adhesive.
The switching transformer BCK-10-007T has multiple output leads. The lower part, the PFC inductor BCK-10-010T, also has a number of outputs.
The back of the PCB after removing the heatsink. The primary high-voltage component is on the right, while the secondary low-voltage output is on the left.
To strengthen the isolation, the area with the insulation sheet and hollowed-out slots is large enough. Heat dissipation is provided by the PFC inductor and switch transformer parts. [Can I use a 100W charger for my iPhone?]
2. UGREEN 100W USB C Charger
It cannot be easy to keep your devices charged on vacation because you have to pack enough power adaptors and cables for all of them. The UGREEN Nexode Charger is powerful enough to let you leave the other chargers behind.
The charging brick is a stylish and glossy device with three USB-C and one USB-A port on one side and a Type A-compatible plug that retracts inside the brick on the opposite. The four ports can all be used simultaneously, but will go into more detail about that below.
You’ll need to be careful where you plug the Nexode, as it is almost 3 inches wide and 3 inches tall. It will block the second slot if you plug it into the top of the wall outlet. Power strips are also a good option. If you want something discrete, then look at alternative chargers.
The diagram shows every possible combination of ports and how connecting one or more cables will change the output power of your adapter.
It isn’t easy to know how much electricity your device will receive without the guide. I only used one or two USB ports to charge my laptop and all four ports overnight when passively charging. [Can I use a 100W charger for my iPhone?]
Read Also: Which gadget is best for students?
3. RAV Power PD Pioneer 100W
Since my Anker PowerCore 2000 started to age, I have been on the hunt for a new power bank. It can be hard to import power banks to Ireland due to shipping regulations.
So, when I was given the opportunity to test the RAV Power PD Pioneer 20,000mAh Portable Charger, I jumped on it.
It’s easy to get the device for everyone else: you can purchase it on Amazon.com in the U.S., or from RAV Power’s website.
The RAVPower PD Pioneer 20,000mAh Portable Charger has a hard and scratch-resistant surface. This will keep the charger looking pristine no matter what conditions it is put through.
The power bank has a screen that shows the remaining percentage of the battery on one side.
It can also be lit by pressing the power button. Three input ports are located on the top of the power bank. These include a micro USB port, a USB C PD slot and a lightning Port.
The RAV Power PD Pioneer 20,000mAh Portable Charger is indeed bulky and heavy. However, it’s nothing to worry about as you can just throw it in your bag and leave it there. It’s exactly what I did with it. [Can I use a 100W charger for my iPhone?]
4. Satechi 100W USB-C PD Compact GaN Charger
Satechi’s 100w USB C PD Compact GaN charger is a dense, solid wall charger that has 3 USB ports. It also comes with a 3-foot power cable to allow you to place the charger on a table near the device(s) you wish to charge.
Its most distinctive design feature is its ability to sit up and away from the wall, reducing the amount of cable you have to run for each device. The front panel is black with a dark grey aluminum exterior casing.
The charger can provide up to 102w of total output, which is divided between the three ports depending on how many devices are connected. The four rubber feet prevent it from sliding and protect your furniture.
It’s great when products work. This charger is perfect. This charger uses GaN (Gallium Nitride) technology, which is a replacement for silicon. It requires fewer parts and can make smaller devices.
This charger is designed to sit on a table, not at your feet. It’s long enough to reach your device and is a two-pronged standard electronics cable.
If you need a longer cable, it’s easy to replace. On the table, you’ll have three ports available: one USB-A port and two USB-C PD ports.
Two USB-C PD ports can provide 100W each. When you use them simultaneously, the first port can provide up to 60w, and the second half of that, at 30w. This is perfect for charging a MacBook Pro 13.” and iPad Pro simultaneously. [Can I use a 100W charger for my iPhone?]
Read Also: How do I make my bedroom a smart room?
5. Aukey Omnia 100W PD Charger
The AUKEY Omnia 4-Port PD Charger has four USB ports, which can be used simultaneously. Two USB-C ports and two USB-A ports. The USB-C port, located at the bottom, supports the USB Power Delivery 3.0 standard.
Both USB-C ports support gadgets that are 5V, 9V, 12V and 15V up to 3A. They also support 20V chargers of up to 5A. This meets all the specs needed to charge even the most demanding laptops, like a Macbook Pro.
The two USB A ports only support Apple’s 2.4A standard for fast charging and are limited to 10W maximum. The two USB-A ports do not support Quick Charge, Samsung Adaptive Fast Charge or any other proprietary standards.
The charger gets pretty warm when used. The aluminum conducts heat very well, which is a positive thing in this case, as it pulls the heat out to the exterior of the unit.
After you have finished charging, you should let the unit cool down before placing it at the bottom of your bag. [Can I use a 100W charger for my iPhone?]
6. Zendure Super Port 4
A generous reader asked me a few weeks ago if I would be interested in reviewing a USB C PD charger rated 100W. It was available for the suspiciously cheap price of AU$28 during a promotional sale.
Although I was not equipped to test all aspects of a USB C PD product due to my lack of experience, I accepted the offer. The item was sent under review challenges.
The item was delivered to me a week later for thorough testing. Hello, the Zendure SuperPort4 100W Desktop Charger w/ Dual PD.
The Zendure SuperPort 4 came in a color-folding cardboard box shrink-wrapped with a plastic tab for retail display.
Zendure is a popular brand of power banks for travel, and the ribbed shape of the charger reminds me of a suitcase. Zendure sounds suspiciously similar to Everdure, which makes me think of BBQ grills instead. [Can I use a 100W charger for my iPhone?]
7. Hyper Juice 100W GaN Charger
Hyper Juice’s GaN-powered USB-A ports can deliver up to 18W and 100W respectively. The Hyper Juice charger charged everything we plugged in during testing (including several different smartphones, two Chromebooks, headphones, earbuds and a camera).
The charger was fine when I plugged in a laptop, a phone, and wireless earbuds.
The HyperJuice charger, which was a Kickstarter project at first and became the charger with the highest funding when the project ended, is available now for US$99.99.
Since then, several other chargers have been released, and they can be purchased for about $60.
The Hyper Juice may be a little more expensive, but it feels solid and works as expected. It even comes with universal adapters.
You will see Amazon and other affiliate links in some of our articles, especially our reviews. Amazon Associates earns from qualifying purchases. If you purchase anything else through these links, we earn a small commission for our site and/or writers.
Techaeris covers many brand press releases. This does not imply that Techaeris endorses any product or service.
The press release is provided to our audience so that they can be informed and decide for themselves whether or not to purchase. Our reviews alone are an endorsement. You can read the full disclaimer for more information. [Can I use a 100W charger for my iPhone?]
Conclusion:
You can charge your iPhone quickly and efficiently by choosing a 100W charger. These chargers use advanced technologies like GaN (Gallium Nitride), allowing for smaller, cooler, and more efficient charging.
Consider factors like portability, number of ports and overall build quality when selecting a charger. These chargers are powerful and reliable and will keep your iPhone or other device powered up quickly. [Can I use a 100W charger for my iPhone?]
Can I use a 100W charger for my iPhone? FAQ
1. How do I Charge my iPhone with a power outlet?
Ans: Connect the iPhone to an electrical outlet by using the charging cable that comes with it and a power adapter compatible with the iPhone (sold separately). Apple USB power adapters can be used to charge your iPhone.
2. Should I use USB-C to charge my iPhone?
Ans: It is easy to upgrade from the slower Apple charger with the USB Type-A charging block to a faster plug that has a USB C port. Should You Use USB C to Charge Your Phone? We know that Apple’s Lightning connector is still used to charge iPhones, even the latest ones. What you plug into the other end is important.
3. Do I need a USB-C cable for iPhone 15?
Ans: The same manufacturers also sell the USB-C cables. Apple includes a USB C cable with the iPhone 15 as standard. So unless you lose or damage the cable, you don’t need to purchase it. 1. Anker Nano 30W USB-C Charger.